Turnkey Pellet Plants
From raw-material study and plant layout to commissioning: one team, one responsibility.
From biomass processing machinery to pellet machines, genuine spare parts, installation and technical support — TRIO helps you build and operate your pellet production line.
Built by engineers who run pellet plants themselves. We deliver real output on the ground, not just promises on paper.
From raw-material study and plant layout to commissioning: one team, one responsibility.
Machines and spare parts are built at our own Jaipur facility, so quality stays in our hands.
Our engineers install, commission and train your operators until the plant runs smoothly.
Fast after-sales support and genuine ring dies and rollers keep downtime to a minimum.
From shredding to pelletizing, every TRIO machine is engineered in-house to run as one line, giving you consistent pellets, less downtime and a faster payback.
Shred, grind and pelletize: the three machines at the heart of every TRIO pellet plant.
An advanced pelletizing system that compresses processed biomass into high-density fuel pellets using a vertical ring die structure. It runs continuously and efficiently, turning agro-waste into clean, renewable fuel for boilers, industries and power plants.
| Model | Power | Capacity (TPH)* | Pellet size | |
|---|---|---|---|---|
| TRIO560 | 90 kW | 1.0 – 1.5* | 6 – 12 mm | Enquire |
| TRIO560 | 132 kW | 1.5 – 2.0* | 6 – 12 mm | Enquire |
| TRIO560 | 160 kW | 2.0 – 2.5* | 6 – 12 mm | Enquire |
| TRIO700 | 160 kW | 2.5 – 3.0* | 6 – 12 mm | Enquire |
| TRIO850 | 250 kW | 3.0 – 4.0* | 6 – 16 mm | Enquire |
* Machine output depends on material type, moisture content and material density. Figures are indicative only.
Material falls straight into the pressing chamber, so the die is loaded evenly and choke-ups are rare.
X46Cr13 stainless-steel ring die built for abrasive agro residue, with holes sized to the pellet you want to sell.
Welded roller shells and complete roller assemblies press the material through the die. Worn shells swap out fast.
Makes pellets from agro residue and wood waste once it is ground and brought to the right moisture.
A low-speed, high-torque twin-shaft shredder that tears paddy straw bales, stalks and bulky agro residue into small, even pieces before the hammer mill. Wear-resistant cutters, a hexagonal main shaft and automatic overload reverse keep it running through tough, mixed material.

| Parameter | TRIO S1200 | Heavy-Duty Model |
|---|---|---|
| Output capacity* | 5 TPH | 15 – 20 TPH |
| Drive power | 55 + 55 kW | 215 + 215 HP |
| Cutting chamber | 1200 × 800 mm | 1100 × 1400 mm |
| Blades | 30 pcs · 40 mm thick | 35 mm thick · Hardox 500 |
| Main shaft | 180 mm hexagonal | EN-24 alloy steel |
| Safety & control | Star-delta start · Auto reverse | Helical gearbox · IE2 motors |
| Enquire | Enquire |
* Output depends on material type, moisture, bale density and other external factors. Figures are indicative only.
Two counter-rotating shafts turn slowly with huge torque, pulling bales in and tearing them apart without jamming.
Thick cutters in high carbon alloy steel or Hardox 500 stand up to silica-rich straw and abrasive residue.
Twin motors with helical gearboxes drive an EN-24 or 180 mm hexagonal shaft, built for non-stop operation.
Star-delta soft start reduces starting load, and the shafts reverse automatically on overload to clear jams.
A high-efficiency crushing machine that grinds agricultural and forestry waste into fine, uniform material ready for pelletizing. It runs smoothly with low heat build-up and gives long service life, even under heavy-duty biomass processing.

| Model | Power | Capacity (TPH)* | |
|---|---|---|---|
| TRIO 65×100 | 75 kW | 2 – 3* | Enquire |
| TRIO 65×100 | 90 kW | 2.5 – 3.5* | Enquire |
| TRIO 80×130 | 132 kW | 4 – 5* | Enquire |
| TRIO 80×130 | 160 kW | 5 – 6* | Enquire |
| TRIO 100×160 | 200 kW | 6 – 7* | Enquire |
* Machine output depends on material type, moisture content and material density. Figures are indicative only.
Swinging hammers and a sizing screen turn shredded residue into even powder that presses into consistent pellets.
Designed to run cool under load, so the material keeps its quality and the machine keeps running.
A rigid frame, quick-open doors and a direct-coupled motor give long service life in tough biomass work.
Grinds straw, husk, stalks, sawdust and wood chips after shredding, ready for the pellet mill.
Bring round bales in from the field and keep the line fed steadily, without manual loading.
A robust 24–30 ft long container with a rotating belt system, built to handle raw material efficiently. It gives a consistent, uninterrupted supply to the machines that follow, removes stones and other large unwanted particles before they can damage them, and lets you adjust the output speed to match the pace of your line.

A 24–30 ft container with a rotating belt moves raw material forward in a steady, even stream.
A built-in separation mechanism removes stones and large unwanted particles that could damage the machines downstream.
Set the output speed to match the operating pace of the shredder, hammer mill or pellet mill it feeds.
Replaces manual loading, saves time and raises the overall production efficiency of the plant.
Lift, load and move round bales easily with strength, safety and stability. A fully automatic hydraulic loading and unloading system carries up to 15 bales in a single trip, saving time, labour and operating cost from the field to your plant.

| Description | Specification |
|---|---|
| Length | 22 ft |
| Width | 8 ft |
| Capacity | Up to 15 bales |
| Bale diameter | 4 – 6 ft |
| Tyre size | 10.00×16 / 12 PR |
| Hydraulic system | Fully automatic |
| Usage | Agriculture, paddy, wheat, maize, grass, bhusa, etc. |
Carries up to 15 round bales of 4–6 ft diameter, so a single trip moves far more straw.
A fully automatic loading and unloading system lifts bales on and off the trolley with no manual effort.
A strong hydraulic system and durable structure with a safe, stable and shock-resistant design.
Handles bales of paddy, wheat, maize, grass, bhusa and other agricultural residue.
Sawdust maker, Z-elevator and conveyor belt: the equipment that links every stage of your pellet line.
The machines that connect your line: making sawdust from wood waste and moving material from one stage to the next.

Turns wood waste such as offcuts, branches and chips into fine sawdust, ready for the hammer mill or pellet mill.
Explore Machine
Lifts material up to the next machine on a cleated belt, so it climbs steeply without slipping back. Saves floor space.
Explore Machine
Moves raw material and pellets between machines along the floor, with a feed hopper at the inlet. Sized to your plant layout.
Explore MachineWear parts for TRIO ring die pellet machines and hammer mills, checked before dispatch to keep your plant running.
Ring dies, roller shells, roller assemblies, bearings and every wear part your ring die pellet machine needs. Made to fit TRIO machines, checked before dispatch and shipped across India from Jaipur.

Prices are ex-works Jaipur and exclude GST and transport. Send your machine model, and we will confirm the right part before dispatch.
05Three quick choices. Get your machine line and expected output instantly.
TRIO pellet plants running in 4 states, supported from Jaipur.
Real TRIO plants running across India. Tap a video to watch it on Instagram.
Madhya Pradesh
Punjab
Haryana
Smart plant monitoring
Punjab“Excellent quality biomass machines and great after-sales support.”
Honoured at India's leading bioenergy expos, and fully registered as a manufacturing company. Tap any image to see it in full.
We bring the full TRIO line to India's leading bioenergy expos, so you can see the build quality up close and talk directly to our engineers. Tap any photo to see it in full.
Our complete pelletising line on display, with a dedicated consultation lounge.
Engineers, sales and service experts, all under one roof.
Hardened ring dies and rollers, displayed alongside the machine.
Cyclones, bag filters and genuine spare parts.
Book a live demo or a factory visit and our engineers will walk you through the right line for your raw material.
Simple daily checks that cut downtime and stretch the life of your ring die and rollers.
Read ArticleMachines, shed, power and working capital: what a 1 to 5 TPH pellet plant really needs.
Read ArticleHow farmers and plant owners turn crop residue into a paying product instead of burning it.
Read Article